Radial Engineering Reamp HP Compact Reamper

The Reamp HP from Radical Engineering takes a unique approach to tapping a signal for Reamping in the studio, with the goal of making the process as easy and accessible for any home studio to employ. Reamp devices are designed to convert the outputs from an audio interface to feed guitar pedals and amplifiers for re-recording, but the problem is that many smaller interfaces typically have limited output connections available. Often times this leaves you with no choice but to unplug a feed to your studio monitors in order to feed a Reamper.The Reamp HP is designed to accept the signal from the headphone output jack on your interface, making it incredibly easy to connect on the fly without having to repatch cables or dig around behind your studio desk or equipment rack. Simply assign the track you want to Reamp to the right channel of your headphone output and you’re ready to feed guitar, bass or even vocal tracks through your amplifier to record and experiment with new tones and settings. You can even assign stereo tracks to the Reamp HP and sum them down using the dedicated mono switch on the device.The Reamp HP is equipped with an isolation transformer and a ground lift switch to eliminate hum and buzz and help produce a clean recording, along with a level control for fine-tuning the output signal. Both 1/4" and 3.5mm mini input connections are provided, so you can use the headphone output from your audio interface or smartphones and tablets without the need for adaptor cables.